Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

A

A. Hassan, Mohamed and A.A. Abdelkareem, Mohamed and Moheyeldein, M.M (2020) Advanced study of tire characteristics and their influence on vehicle lateral stability and untripped rollover threshold. Advanced study of tire characteristics and their influence on vehicle lateral stability and untripped rollover threshold, 61 (12). pp. 1613-1628. ISSN 1110-0168

Abro, Kashif Ali and Hameed Shaikh, Pervaiz and Go´mez-Aguilar, J.F. (2019) Analysis of De-Levie’s model via modern fractional differentiations: An application to supercapacitor. Analysis of De-Levie’s model via modern fractional differentiations: An application to supercapacitor, 61 (12). pp. 1375-1384. ISSN 1110-0168

Abtahi, Mohammad and Rabbani, Mahdis and Nazari, Shima (2023) An Automatic Tuning MPC with Application to Ecological Cruise Control. IFAC-PapersOnLine, 56 (3). pp. 265-270.

Adel, Mohamed and Mohamed, Mohamed and M. Kamal, Radwan and Radwan, Diaa S (2019) A comparative study of impeller aerators configurations. A comparative study of impeller aerators configurations, 61 (12). pp. 1431-1438. ISSN 1110-0168

Afik, . and Sudarwati, . and Aryati, Ida and Sulistyowati, Afiefah (2023) ANALYSIS OF CREDIT TAKING PT. BPR BANK KLATEN (PERSERODA). International Journal of Economics,Businessand Accounting Research (IJEBAR), 7 (1). pp. 1-7. ISSN 2614-1280

Aji, Limpat Wibowo (2019) PENENTUAN TEMPAT EVAKUASI (TE) TSUNAMI PADA PANTAI NGULURAN-GESING-BUTUH-NGEDAN DI KABUPATEN GUNUNGKIDUL. In: PENENTUAN TEMPAT EVAKUASI (TE) TSUNAMI PADA PANTAI NGULURAN-GESING-BUTUH-NGEDAN DI KABUPATEN GUNUNGKIDUL.

Aldo, Ahmad and Putra Pratama, Galeh Nur Indriatno (2019) EVALUASI KETAHANAN GEMPA RUMAH SEDERHANA DI KELURAHAN RUM, KOTA TIDORE KEPULAUAN. In: EVALUASI KETAHANAN GEMPA RUMAH SEDERHANA DI KELURAHAN RUM, KOTA TIDORE KEPULAUAN.

Allalou, Sara and Kheribet, Rabia and Benmounah, Abdelbaki (2018) Effects of calcined halloysite nano-clay on the mechanical properties and microstructure of low-clinker cement mortar. Effects of calcined halloysite nano-clay on the mechanical properties and microstructure of low-clinker cement mortar. pp. 1-13.

Almadani, Ricky Ardiansyah and Oktyajati, Nancy and Mayasari, Sri (2021) PERENCANAAN PEMBELIAN BAHANBAKU KALENDER MENGGUNAKANMETODE MATERIAL REQUIREMENT PLANNING (Studi Kasus CV. Angkasa Solo). PROSIDING SEMINAR NASIONAL DAN CALL FOR PAPER “INOVASI DAN IMPLEMENTASI TEKNOLOGI TEPAT GUNA PADA ERA NEW NORMAL” DALAM RANGKA DIES NATALIS XXXVIII UNIVERSITAS ISLAM BATIK SURAKARTA “Inovasi dan beradaptasi kebiasaan baru dengan dengan Teknologi Tepat Gu, 1 (2). pp. 134-150. ISSN 978-979-1230-71-1

Alrabaiah, Hussam and Arfan, Muhammad and Shah, Kamal (2020) A comparative study of spreading of novel corona virus disease by ussing fractional order modified SEIR model. A comparative study of spreading of novel corona virus disease by ussing fractional order modified SEIR model, 61 (1). pp. 573-585. ISSN 1110-0168

Amin, Soltan (2021) An objective framework for determination of the air-entry value from the soil–water characteristic curve. An objective framework for determination of the air-entry value from the soil–water characteristic curve, 12. p. 100298. ISSN 2590-1230

Andrela, Dini (2019) PERBANDINGAN ANALISIS STRUKTUR RANGKA ATAP PADA BANGUNAN GEDUNG A BLOK TIMUR PASAR ATAS KOTA PAYAKUMBUH. In: PROSIDING 6 TH ACE CONFERENCE JURUSAN TEKNIK SIPIL UNIVERSITAS ANDALAS.

Anggoro, Dimas ANALISIS IMPLEMENTASI 5S STUDI KASUS DI LABORATORIUM INSTRUMENTASI DI PERUSAHAAN PETROCHEMICAL. ANALISIS IMPLEMENTASI 5S STUDI KASUS DI LABORATORIUM INSTRUMENTASI DI PERUSAHAAN PETROCHEMICAL.

Aprillova, Carmelita Virry Clarissa and Ekoanindiyo, Firman Ardiansyah Development of a Semi-Automatic Banana Chip Slicing Machine for Reducing Musculoskeletal Disorders in Workers. Development of a Semi-Automatic Banana Chip Slicing Machine for Reducing Musculoskeletal Disorders in Workers, 10 (1). pp. 1-6.

Apsari, Ayudyah Eka (2020) Occupational Safety and Health (OSH) Factors Identified in Indonesian Batik Textile Small/Medium Enterprises. International Research Journal of Engineering, IT & Scientific Research, 6 (2). pp. 55-64. ISSN 2454-2261

Apsari, Ayudyah Eka (2023) The Optimization of a Bilih Fish Drying System Using the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). International Research Journal of Engineering, IT & Scientific Research, 9 (1). pp. 35-46. ISSN 2454-2261

Apsari, Ayudyah Eka and Hadyanawati, Anindya Agripina (2023) ANALISIS PENERAPAN KESEHATAN DAN KESELAMATAN KERJA MENGGUNAKAN METODE HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) (STUDI KASUS: UKM ATHAYA DRUMBAND). ANALISIS PENERAPAN KESEHATAN DAN KESELAMATAN KERJA MENGGUNAKAN METODE HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) (STUDI KASUS: UKM ATHAYA DRUMBAND), 14 (2). pp. 122-128. ISSN 2548-4168

Apsari, Ayudyah Eka and Nugraheni, Diyah Dwi and Ayu, Hanuring (2022) Strategi Pengembangan Usaha Milik DesaStudi Kasus Bumdes Pudungsari Klaten Jawa Tengah. Strategi Pengembangan Usaha Milik Desa Studi Kasus Bumdes Pudungsari Klaten Jawa Tengah, 3 (2). pp. 425-434. ISSN 2746-038X

Arfan, Muhammad and Shah, Kamal and Abdeljawad, Thabet and Mlaiki, Nabil (2020) A Caputo power law model predicting the spread of the COVID-19 outbreak in Pakistan. A Caputo power law model predicting the spread of the COVID-19 outbreak in Pakistan, 61 (12). pp. 447-456. ISSN 1110-0168

Asmar, Taufik and Oktyajati, Nancy and Purwati, Sri and Mayasari, Sri (2023) STRATEGI IMPLEMENTASI SISTEM VIRTUAL ACCOUNT (VA) SEBAGAI MEDIA PEMBAYARAN RETRIBUSI PASAR DALAM UPAYA PENINGKATAN LAYANAN PERBANKAN DAN KEMUDAHAN TRANSAKSI. Journal of Research and Technology Studies, 2 (1). pp. 10-17. ISSN 2964-7371

Atangana, Abdon and Akgul, Ali and M. Owolabi, Kolade (2020) Analysis of fractal fractional differential equations. Analysis of fractal fractional differential equations, 61 (12). pp. 1117-1134. ISSN 1110-0168

Awolusi, T.F. and Oke, O.L. (2018) Application of response surface methodology: Predicting and optimizing the properties of concrete containing steel fibre extracted from waste tires with limestone powder as filler. Application of response surface methodology: Predicting and optimizing the properties of concrete containing steel fibre extracted from waste tires with limestone powder as filler. pp. 1-21.

B

Billong, Ndigui and Boubakar, Likiby and Bayiha, B.N. (2020) An investigation on the suitability of hydrated building lime from travertine limestone outcrop of Bogongo, South West of Cameroon. An investigation on the suitability of hydrated building lime from travertine limestone outcrop of Bogongo, South West of Cameroon, 13. pp. 1-9.

C

Cantoni, Beatrice (2022) A Risk-Based Approach for Contaminants of Emerging Concern in Drinking Water Production and Distribution Chain. In: Civil and Environmental Engineering for the Sustainable Development Goals.

Chandra Das, Subhash and Zidan, A.M and Manna, Amalesh Kumar (2020) An application of preservation technology in inventory control system with price dependent demand and partial backlogging. An application of preservation technology in inventory control system with price dependent demand and partial backlogging, 61 (12). pp. 1359-1369. ISSN 1110-0168

D

Diane Novi, Utami and Lucyana, Trimo and M. Gunardi, Judawinata and Eti, Suminartika PENGARUH KEPERCAYAAN MEREK, CITRA MEREK, DAN PROMOSI TERHADAP KEPUTUSAN PEMILIHAN PLATFORM PEMBELIAN BUAH DAN SAYUR ONLINE. PENGARUH KEPERCAYAAN MEREK, CITRA MEREK, DAN PROMOSI TERHADAP KEPUTUSAN PEMILIHAN PLATFORM PEMBELIAN BUAH DAN SAYUR ONLINE, 11 (1). pp. 64-74.

Dolci, Giovanni (2022) Influence of the Collection Equipment on Organic Waste Treatment: Technical and Environmental Analyses. In: Civil and Environmental Engineering for the Sustainable Development Goals.

Dwiyanto, Ivan and Apsari, Ayudyah Eka and Oktyajati, Nancy (2022) Analisis Pemakaian Alat Pelindung Diri pada Tenaga Kerja Antar-Shift Kerja di PT. Sami Surya Perkasa sebagai Upaya Mengendalikan Risiko di Tempat Kerja. Prosiding Seminar Nasional &Call For Paper, 4 (1). pp. 22-31.

E

Edin, Colakovic (2020) Effect of addition of recycled tyre on nitrate resistance of clay. Effect of addition of recycled tyre on nitrate resistance of clay, 8. ISSN 2590-1230

Ekaterina, Kim (2019) Can a computer see what an ice expert sees? Multilabel ice objects classification with convolutional neural networks. Can a computer see what an ice expert sees? Multilabel ice objects classification with convolutional neural networks, 4. p. 100036. ISSN 2590-1230

El-Din Fawzy, Hossam 3D laser scanning and close-range photogrammetry for buildings documentation: A hybrid technique towards a better accuracy. 3D laser scanning and close-range photogrammetry for buildings documentation: A hybrid technique towards a better accuracy. pp. 1191-1204. ISSN 1110-0168

Elviana, Elviana and Saputra, Ashar and Sulistyo, Djoko (2019) KORELASI KUAT TEKAN TERHADAP KAPASITAS GESER BALOK BETON DENGAN VARIASI PERAWATAN. In: KORELASI KUAT TEKAN TERHADAP KAPASITAS GESER BALOK BETON DENGAN VARIASI PERAWATAN.

F

Fanijo, Ebenezer O. and Kolawole, John Temitope (2021) Alkali-silica reaction (ASR) in concrete structures: Mechanisms, effects and evaluation test methods adopted in the United States. Alkali-silica reaction (ASR) in concrete structures: Mechanisms, effects and evaluation test methods adopted in the United States. pp. 1-17.

Faried, Femmy Silaswaty and Mayasari, Sri and Purwanti, Purwanti and Fitroh, Fitroh and Arum PP, Dyah Ayu Sekar and Az-Zahra, Shaffanisa Alivia (2023) PERANAN GENERASI MUDA DALAM UPAYA MENUMBUHKAN KECINTAANTERHADAP BATIK SEBAGAI BENTUK PELESTARIAN BUDAYA DAN KARYA SENI (S0SIALISASI ILMU PENGETAHUAN TENTANG BATIK). PERANAN GENERASI MUDA DALAM UPAYA MENUMBUHKAN KECINTAANTERHADAP BATIK SEBAGAI BENTUK PELESTARIAN BUDAYA DAN KARYA SENI (S0SIALISASI ILMU PENGETAHUAN TENTANG BATIK), 3 (1). pp. 286-290. ISSN 2828-0032

Fayomi, O.S.I. (2020) Assessing the impact of Si3N4 composite films and process variable on the structural and corrosion improvement of structural steel used in construction industry. Assessing the impact of Si3N4 composite films and process variable on the structural and corrosion improvement of structural steel used in construction industry, 17. pp. 1-7.

G

Galliani, Marta (2022) Flood Damage Assessment to Economic Activities in the Italian Context. In: Civil and Environmental Engineering for the Sustainable Development Goals.

Gonzalez, R. E. (2021) Post-earthquake Demolition in Christchurch, New Zealand: A Case-Study Towards Incorporating Environmental Impacts in Demolition Decisions. In: Advances in Assessment and Modeling of Earthquake Loss.

H

Hamidreza, Aroun (2019) Coalescence efficiency of surface modified PBT meltblown nonwovens in the separation of water from diesel fuel containing surfactants. Coalescence efficiency of surface modified PBT meltblown nonwovens in the separation of water from diesel fuel containing surfactants, 4. p. 100048. ISSN 2590-1230

Hanif, Ridwan and Oktyajati, Nancy and Nugraheni, Diyah Dwi (2022) PENENTUAN RUTE DISTRIBUSI UNTUK MEMINIMALKAN BIAYA TRANSPORTASI MENGGUNAKAN METODE SAVINGiMATRIX DAN NEARESTiINSERT. Journal of Research and Technology Studies, 1 (1). pp. 25-34. ISSN 2964-7371

Hao, Chen and He, Bai and Clark, N. Taylor Wind Field Estimation Using Multiple Quadcopters. Wind Field Estimation Using Multiple Quadcopters. pp. 61-66.

Harianja, J. A. (2020) Analisis Model Simulator Gempa Berupa Meja Getar (Vibration Table). In: PROSIDING Civil Engineering Environmental and Disaster Risk Management Symposium (CEE DRiMS 2020).

Hu, Wei and Li, Huanhao (2020) A blockchain-based secure transaction model for distributed energy in Industrial Internet of Things. A blockchain-based secure transaction model for distributed energy in Industrial Internet of Things, 61 (12). pp. 491-500. ISSN 1110-0168

hendro, Vinsensius and Apsari, Ayudyah Eka (2023) PENGENDALIAN RISIKO BAHAYA KECELAKAAN DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN HAZARD IDENTIFICATION RISK ASSESSMENT (HIRA). PENGENDALIAN RISIKO BAHAYA KECELAKAAN DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN HAZARD IDENTIFICATION RISK ASSESSMENT (HIRA), 3 (2). pp. 333-340. ISSN 2809-0799

J

J.R., Serrano (2019) A modelling tool for engine and exhaust aftertreatment performance analysis in altitude operation. A modelling tool for engine and exhaust aftertreatment performance analysis in altitude operation, 4. p. 100054. ISSN 2590-1230

Jayalath, Amitha (2021) Airborne and impact sound performance of modern lightweight timber buildings in the Australian construction industry. Airborne and impact sound performance of modern lightweight timber buildings in the Australian construction industry. pp. 1-13.

Jayasinghe, Thushara and Gunawardena, Tharaka and Mendis, Priyan (2021) A comparative study on minimum shear reinforcement provisions in codes of practice for reinforced concrete beams. A comparative study on minimum shear reinforcement provisions in codes of practice for reinforced concrete beams. pp. 1-22.

Jens, Wahlstrom (2019) A pin-on-disc tribometer study of friction at low contact pressures and sliding speeds for a disc brake material combination. A pin-on-disc tribometer study of friction at low contact pressures and sliding speeds for a disc brake material combination, 4. p. 100051. ISSN 2590-1230

Junaidi, Amir and Zakariya, Hafid (2021) Protection Intellectual Property To Well-Known Marks In Indonesia. Journal of Civil & Legal Sciences, 10 (8). p. 1000280. ISSN 2169-0170

K

Kahfi BP, Restu Aji Nur and Purnomo, Hari and Apsari, Ayudyah Eka (2021) Effect of Social Support on Elderly Welfare Using Structural Equation Modelling (SEM). Proceedings of the Second Asia Pacific International Conference on Industrial Engineering and Operations Management. pp. 1657-1663.

Kartikaningsih, Septyani and Oktyajati, Nancy and Mayasari, Sri (2022) ANALISIS HUBUNGAN BEBAN KERJA MENTAL DENGAN KINERJA KARYAWAN SMK BATIK 1 SURAKARTA. Prosiding Seminar Nasional & Call fot Paper Universitas Islam Batik Surakarta "Penguatan Karakter Perguruan TInggi Menuju Era Transformasi Teknologi". ISSN 978-979-1230-74-2

Kartikaningsih, Septyani and Oktyajati, Nancy and Mayasari, Sri (2022) ANALISIS HUBUNGAN BEBAN KERJA MENTAL DENGAN KINERJA KARYAWAN SMK BATIK 1 SURAKARTA. Prosiding Seminar Nasional & Call for Paper Universitas Islam Batik Surakarta "Penguatan Karakter Perguruan Tinggi Menuju Era Transformasi Teknologi". pp. 297-305. ISSN 978-979-1230-74-2

Kumar, Dilip and Kumar, Neetesh and Gupta, Ashish (2020) Geotechnical Properties of Fly Ash and Bottom Ash Mixtures in Different Proportions. Geotechnical Properties of Fly Ash and Bottom Ash Mixtures in Different Proportions, 3 (9). pp. 1487-1494. ISSN 2319-7064

Kumar, Sunil and Ghosh, Surath and Lotayif, Mansour S.M and Samet, Samet (2020) A model for describing the velocity of a particle in Brownian motion by Robotnov function based fractional operator. A model for describing the velocity of a particle in Brownian motion by Robotnov function based fractional operator, 61 (12). pp. 1435-1449. ISSN 1110-0168

Kurnianto, Dicka Korintus and Hasian, Ferdinanda Pascha and Naufal, Muhammad Abyan and Oktyajati, Nancy and Sutopo, Wahyudi and Yuniaristanto, . (2022) Enhancing the Effectivity and Efficiency of Production System using Discrete Event Simulation Approach (A Case Study in PT Solo Grafika Utama). Proceedings of the International Conference on Industrial Engineering and Operations Management. pp. 2885-2896.

Kurniawan, Jefri and Apsari, Ayudyah Eka and Oktyajati, Nancy and Mayasari, Sri (2022) ANALISIS POTENSI BAHAYA DENGAN METODE HAZARD IDENTIFICATION RISK ASSESSMENT AND RISK CONTROL (HIRARC) STUDI KASUS: PT. SAMI SURYA PERKASA. Prosiding Seminar Nasional & Call for Paper Universitas Islam Batik Surakarta "Penguatan Karakter Perguruan Tinggi Menuju Era Transformasi Teknologi". pp. 322-332. ISSN 978-979-1230-74-2

Kurniawan, Muhammad Arief and Meytasari, Chyntyaningtyas (2019) KAJIAN NILAI-NILAI KEARIFAN LOKAL PADA ARSITEKTUR HOTEL BINTANG DAN HUNIAN VERTIKAL DI KAWASAN CAGAR BUDAYA YOGYAKARTA. In: KAJIAN NILAI-NILAI KEARIFAN LOKAL PADA ARSITEKTUR HOTEL BINTANG DAN HUNIAN VERTIKAL DI KAWASAN CAGAR BUDAYA YOGYAKARTA.

Kusunoki, K. (2021) Damage Assessment in Japan and Potential Use of New Technologies in Damage Assessment. In: Advances in Assessment and Modeling of Earthquake Loss.

L

Laku Utam, Sri Rejeki (2019) PENGARUH CARBON FIBER REINFORCED POLYMER (CFRP) TERHADAP BALOK BETON BERTULANG. In: PENGARUH CARBON FIBER REINFORCED POLYMER (CFRP) TERHADAP BALOK BETON BERTULANG.

Lambert, Duncan L. and Lei, Zuo Vibrating reduction of semisubmersible floating wind turbine using optimized tuned mass and tuned inerter dampers. Vibrating reduction of semisubmersible floating wind turbine using optimized tuned mass and tuned inerter dampers. pp. 229-234.

Lane, Daniel and Roy, Subhradeep Using information theory to detect model structure with application in vehicular traffic systems. Using information theory to detect model structure with application in vehicular traffic systems. pp. 367-372.

Lu, Saiqun and Zhang, Qiyan and Chen, Guangsen and Seng, Dewen (2020) A combined method for short-term traffic flow prediction based on recurrent neural network. A combined method for short-term traffic flow prediction based on recurrent neural network, 61 (1). pp. 87-94. ISSN 1110-0168

Ludovico, M. Di (2021) Damage Assessment in Italy, and Experiences After Recent Earthquakes on Reparability and Repair Costs. In: Advances in Assessment and Modeling of Earthquake Loss.

M

M. Al Saffar, Doha and J.K. Al Saad, Aymen (2019) Effect of internal curing on behavior of high performance concrete: An overview. Effect of internal curing on behavior of high performance concrete: An overview. pp. 1-11.

Maria Azzara, Riccardo and Galassi, Stefano and Garuglieri, Sara (2021) Analysis of vibrations recorded inside the cemetery area of Incisa, central Italy. Analysis of vibrations recorded inside the cemetery area of Incisa, central Italy. pp. 1-19.

Maroof, M. Ali (2022) Particle Morphology Effect on the Soil Pore Structure. In: Proceedings of the 8th International Conference on Civil Engineering.

Mayasari, Sri and Fitroh, Andika and Oktyajati, Nancy and Purwati, Sri and Rachmawatie, Srie Juli and Kodir, Wahdirotul (2022) Edukasi Siswa MI Hidayatul Insan Karanganyar Melalui Pembelajaran Muatan Lokal Peternakan. Jurnal Pengabdian Masyarakat Indonesia (JPMI), 2 (6). pp. 753-758. ISSN 2775-3026

Mayasari, Sri and Fitroh, Andika and Respati, Adib Norma (2020) ANALISIS PENERAPAN KESELAMATAN KERJA MENGGUNAKAN METODE HAZARD IDENTIFIKACATION RISK ASSESSMENT (HIRA). DINAMIKA TEKNIK, 7 (2). ISSN 1412-3339

Munadhifah, Rosda Anisatul and Purnomo, Hari and Oktyajati, Nancy (2021) ANALISIS BULLWHIP EFFECTPADAPENGADAAN KAIN BATIK DI CV. BATIK GEMAWANG. JAPTI: Jurnal Aplikasi Ilmu Teknik Industri, 2 (1). pp. 41-49. ISSN 2722-3795

N

Narayan S, Shankar (2021) A 2D FSI mathematical model of blood flow to analyze the hyper-viscous effects in atherosclerotic COVID patients. A 2D FSI mathematical model of blood flow to analyze the hyper-viscous effects in atherosclerotic COVID patients, 12. p. 100275. ISSN 2590-1230

Nidal H, Abu-Hamdeh and Hakan F, Oztop and Khalid A, Alnefaie (2020) A computational study on mixed convection in a porous media filled and partially heated lid-driven cavity with an open side. A computational study on mixed convection in a porous media filled and partially heated lid-driven cavity with an open side, 59 (3). pp. 1735-1750. ISSN 1110-0168

Nugraha, I and Sutopo, W and Hisjam, M and Oktyajati, N (2020) The Dynamic Simulation Model of Local Soybean Competitiveness Policy to Support the Soybean Price Stabilization. IOP Conference Series: Materials Science and Engineering. ISSN 943 012046

Nugraheni, Diyah Dwi and Oktyajati, Nancy and Widananto, Hardik PEMETAAN DAN ANALISIS RANTAI NILAI (VALUE CHAIN) PRODUK BATIK PADA SENTRA INDUSTRI BATIK DI BAYAT, KLATEN. JOURNAL INDUSTRIAL ENGINEERING AND MANAGEMENT, 3 (1). pp. 28-35. ISSN 2745-7303

Nugraheni, Diyah Dwi and Widananto, Hardik (2023) REDESAIN PALU DENGAN PENDEKATAN ERGONOMI UNTUK MENGURANGI KELUHAN PEMAKAI. Journal Industrial Engineering & Management (JUST-ME), 04 (01). pp. 36-43. ISSN 2723-0341

Nur’aini, Ratna Dewi and Ikaputra, Ikaputra (2019) TERITORIALITAS DALAM TINJAUAN ILMU ARSITEKTUR. In: TERITORIALITAS DALAM TINJAUAN ILMU ARSITEKTUR.

Nusantara, Karel Gilang and Farikha, Nadia Alfi Nur and Nagari, Tiffany Bella and Oktyajati, Nancy and Sutopo, Wahyudi and Yuniaristanto, . (2022) Determining Newspaper Distribution Routes using Cheapest Insertion Heuristic Algorithm with Sweep Clustering: A Case Study. Proceedings of the International Conference on Industrial Engineering and Operations Management. pp. 2918-2929.

O

Oktriyawan, Yusuf and Purnomo, Hari and Oktyajati, Nancy (2021) Analisis Pemakaian Alat Pelindung Diri pada Tenaga Kerja Antar-Shift Kerja di Unit Produksi PT.XYZ sebagai Upaya Mengendalikan Risiko di Tempat Kerja. Go-Integratif :Jurnal Teknik Sistem dan Industri, 2 (1). pp. 50-59. ISSN 2745-3510

Oktyajati, Nancy and Hisjam, Muhammad and Sutopo, Wahyudi (2021) A Strategy to Realize Soybean Self-Sufficiency: A System Dynamics Approach (A Study in Central Java Province, Indonesia). Proceedings of the Second Asia Pacific International Conference on Industrial Engineering and Operations Management. pp. 2655-2664.

Oktyajati, Nancy and Mayasari, Sri and Adhi, Bagas Wahyu and Kodir, Wahdirotul (2022) PENDAMPINGAN UKM INDUSTRI KONVEKSI DESA WONOREJO KECAMATAN KALIJAMBE, SRAGENUNTUK PENINGKATAN KAPASITAS PRODUKSI. SIDOLUHUR : Jurnal Pengabdian kepada Masyarakat, 01 (02). pp. 122-129. ISSN 2828-0032

Oktyajati, Nancy and Nugraheni, Diyah Dwi and Purwati, Sri (2022) Perancangan Ulang Tata Letak Fasilitas Lantai Produksi Batik Tulis Pewarna Alam Study Kasus : Batik Natural Jarum. TEKINFO - Jurnal Ilmiah Teknik Industri dan Informasi, 10 (2). pp. 76-87. ISSN 2303-1867

Oktyajati, Nancy and Rachmawati, Srie Julie (2020) PROGRAM EARLY AGROEDUCATION PADA SISWA SEKOLAH DASAR UNTUK MEWUJUDKAN PROGRAM SUSTAINABLE AGRICULTURE. Jurnal Kewirausahaan dan Bisnis, 25 (2). pp. 86-95. ISSN 2549-1555

Oluranti, Agboola (2020) A review on the impact of mining operation: Monitoring, assessment and management. A review on the impact of mining operation: Monitoring, assessment and management, 8. p. 100181. ISSN 2590-1230

Oyebisi, Solomon and Ede, Anthony and Olutoge, Festus (2020) Assessment of activity moduli and acidic resistance of slag-based geopolymer concrete incorporating pozzolan. Assessment of activity moduli and acidic resistance of slag-based geopolymer concrete incorporating pozzolan. pp. 1-16.

P

Pampanin, S. (2021) Simplified Analytical/Mechanical Procedure for Post-earthquake Safety Evaluation and Loss Assessment of Buildings. In: Advances in Assessment and Modeling of Earthquake Loss.

Pandav, Prahlad and Ren, Juan (2023) A Data-Driven Approach to Motion Planning and Optimal Control of Medical Nanorobots with Dynamic Window Approach. IFAC-PapersOnLine, 56 (3). pp. 583-588.

Pangestu, Arissa Dwi and Munib, Azam Abdul and Fitri, Tiara Nur (2022) Determining the Optimal Route for Newspaper Distribution by Using the Sweep Algorithm Method (Case Study: PT Aksara Solopos). Proceedings of the International Conference on Industrial Engineering and Operations Management. pp. 2909-2917.

Pangestu, Dedy Adji PERBAIKAN KUALITAS PADA PROSES PRODUKSI DENGAN METODE SIX SIGMA DAN KAIZEN DI CV. INDRA DAYA SAKTI PUTRA. PERBAIKAN KUALITAS PADA PROSES PRODUKSI DENGAN METODE SIX SIGMA DAN KAIZEN DI CV. INDRA DAYA SAKTI PUTRA.

Pangestu, Dedy Adji and Oktyajati, Nancy and Apsari, Ayudyah Eka (2021) PERBAIKAN KUALITAS PADA PROSES PRODUKSI DENGAN METODE SIX SIGMA DAN KAIZEN DI CV. INDRA DAYA SAKTI PUTRA. Prosiding Seminar Nasional Dan Call For Paper “Inovasi Dan Implementasi Teknologi Tepat Guna Pada Era New Normal” Dalam Rangka Dies Natalis XXXVIII Universitas Islam Batik Surakarta “Inovasi dan beradaptasi kebiasaan baru dengan dengan Teknologi Tepat Gun, 1 (2). pp. 169-184. ISSN 978-979-1230-71-1

Peng, Shuquan and Wang, Fan and Li, Xibing and Fan, Ling (2019) A microbial method for improving salt swelling behavior of sulfate saline soil by an experimental study. A microbial method for improving salt swelling behavior of sulfate saline soil by an experimental st, 61 (12). pp. 1353-1366. ISSN 1110-0168

Prahesti, Rahma Dwi and Kemen, Karina and Fatonah, Siti and Khotimah, Anik Khusnul and Apsari, Ayudyah Eka and Nugraheni, Diyah Dwi (2023) Pemanfaatan Lahan Kosong di Lingkungan Desa Srebegan sebagai Apotek Hidup untuk Menjaga Kesehatan Masyarakat Pasca Penyebaran Covid-19. Jurnal ADIPATI, 2 (1). pp. 44-49. ISSN 2828-5980

Pratama, Galeh Nur Indriatno Putra and Yusuf, Arif Muhammad (2019) UJI TITIK NYALA DAN TITIK BAKAR SEMARBUT ASPAL TIPE 4 BERDASARKAN SNI 2433:2011. In: UJI TITIK NYALA DAN TITIK BAKAR SEMARBUT ASPAL TIPE 4 BERDASARKAN SNI 2433:2011.

Purnomo, Hari and shidik, Beta Arya Ash and Apsari, Ayudyah Eka (2021) Design of Elderly Reading Chair to Decrease Musculoskeletal Disorders by Using Quality Function Deployment (QFD) Method. Proceedings of the Second Asia Pacific International Conference on Industrial Engineering and Operations Management. pp. 2704-2713.

Purwati, Sri and Mayasari, Sri and Oktyajati, Nancy (2022) Analisis Kepuasan Pelanggan Layanan ShopeefoodDengan Menggunakan Metode E-ServiceQuality. JumintenJurnal Manajemen Industri dan Teknologi, 3 (3). pp. 1-12. ISSN 2721-4079

Purwati, Sri and Mukarromah, Sitti and Oktyajati, Nancy and Fitroh, Andika and Utomo, Panji Wiyo (2022) Penyuluhan Strategi Pemasaran untuk Pengembangan UMKM Konveksi. Educate: Journal of Community Service in Education, 2 (2). pp. 58-65. ISSN 2828-5727

Purwati, Sri and Oktyajati, Nancy and Mayasari, Sri and SUPARWI, SUPARWI and Fitroh, Bagus Andika (2022) PROGRAM PENGENALAN KEWIRAUSAHAAN BAGI SISWAMI HIDAYATUL INSAN KARANGANYAR MELALUI PELATIHAN PEMASARAN PRODUK OLAHAN HASIL PETERNAKAN. SIDOLUHUR : Jurnal Pengabdian kepada Masyarakat, 01 (02). pp. 138-146. ISSN 2828-0032

Putra, Adetya Ananda and Nugraheni, Diyah Dwi and Oktyajati, Nancy (2021) Perencanaan Pembelian Material Bahan.Baku Toner dengan Metode Economic Order Quantity (EOQ) pada CV Oriton Sukoharjo. PROSIDING SEMINAR NASIONAL DAN CALL FOR PAPER “INOVASI DAN IMPLEMENTASI TEKNOLOGI TEPAT GUNA PADA ERA NEW NORMAL” DALAM RANGKA DIES NATALIS XXXVIII UNIVERSITAS ISLAM BATIK SURAKARTA, 1 (2). pp. 1-20. ISSN 978-979-1230-71-1

Putriana, Ella and Kurniati, Dewi and Yurisinthae, Erlinda STRUKTUR, PERILAKU DAN KINERJA PASAR TANDAN BUAH SEGAR (TBS) KELAPA SAWIT. STRUKTUR, PERILAKU DAN KINERJA PASAR TANDAN BUAH SEGAR (TBS) KELAPA SAWIT, 11 (1). pp. 75-86.

R

R. Oliver, Zanone and Javad Mohammadpour, Velni Trust-based Performance Optimization for Human-Swarm Collaboration. Trust-based Performance Optimization for Human-Swarm Collaboration.

Rachmawatie, Srie Juli and Respati, Adib Norma and Oktyajati, Nancy and Widiastuti, Libria and Rahayu, Endang Siti and Sutrisno, Joko (2021) PENERAPAN INTEGRATED FARMING SYSTEM(IFS) MENUJU DESA AGROWISATA DI DESA JATISARI, KECAMATAN JATISRONO, KABUPATEN WONOGIRI. SPEKTA (Jurnal Pengabdian Kepada Masyarakat : Teknologi dan Aplikasi), 2 (1). pp. 33-40. ISSN 2723-8016

Rajab, Noor A. (2022) Evaluation the Level of Service of Signalized Intersection: Al-Amreia Intersection as a Case Study. In: Proceedings of the 8th International Conference on Civil Engineering.

Ramadhan, Muhammad and Purnomo, Hari and Oktyajati, Nancy (2021) Analisis Penerapan Kaizenpada Divisi Perawatan dan Perbaikan Kendaraan di AHASS 9648 PT.Cahaya Sakti Motor Surakarta untuk Meningkatkan Produktivitas Karyawan. Jurnal Teknik Sistem dan Industri, 2 (1). pp. 60-69.

Ramadhani Albertini, Iqbal (2021) ANALISIS STRUKTUR GEDUNG KAMPUS 8 LANTAI DI YOGYAKARTA MENGGUNAKAN SNI 1726:2019 DAN 1727:2020. In: Seminar Nasional Teknik Sipil IX 2019.

Ramzi Hannan, Nurul Izzati Raihan and Shahidan, Shahiron and Ali, Noorwirdawati and Bunnori, Norazura Muhamad (2020) Acoustic and non-acoustic performance of coal bottom ash concrete as sound absorber for wall concrete. Acoustic and non-acoustic performance of coal bottom ash concrete as sound absorber for wall concrete. pp. 1-9.

Rannie Safitri, Masayu (2019) PENENTUAN FREKUENSI DAN RASIO REDAMAN DARI TUNED LIQUID COLUMN DAMPER MENGGUNAKAN SISTEM GETARAN PENDULUM. In: PROSIDING 6 TH ACE CONFERENCE JURUSAN TEKNIK SIPIL UNIVERSITAS ANDALAS.

Rhomadhon, Rachmawan Dwi and Oktyajati, Nancy and Mayasari, Sri (2021) MENGUKUR TINGKAT RESIKO CIDERA GURU BIMBINGAN KONSELING MENGGUNAKAN METODE NORDIC BODY MAP (NBM) DI SMK BATIK 1 SURAKARTA. Prosiding Seminar Nasional Dan Call For Paper “Inovasi Dan Implementasi Teknologi Tepat Guna Pada Era New Normal” Dalam Rangka Dies Natalis XXXVIII Universitas Islam Batik Surakarta “Inovasi dan beradaptasi kebiasaan baru dengan dengan Teknologi Tepat Gun, 1 (2). pp. 238-251. ISSN 978-979-1230-71-1

Ricardo, Vinuesa (2020) A socio-technical framework for digital contact tracing. A socio-technical framework for digital contact tracing, 8. p. 100163. ISSN 2590-1230

Ridwan, Muhammad and Purnomo, Hari and Oktyajati, Nancy (2021) Peramalan Produksi Beras di Provinsi Jawa Tengah. TEKINFO - Jurnal Ilmiah Teknik Industri dan Informasi, 9 (2). pp. 114-126. ISSN 2303-1867

S

Sampurno, Adita Dwi and Satyarno, Iman PENGARUH SERAT BAJA (DRAMIX) TERHADAP KUAT LENTUR PADA ROLLER COMPACTED CONCRETE (RCC). In: PENGARUH SERAT BAJA (DRAMIX) TERHADAP KUAT LENTUR PADA ROLLER COMPACTED CONCRETE (RCC).

Santoso, Muhammad Fajar and Apsari, Ayudyah Eka and Oktyajati, Nancy and Purwati, Sri (2022) PENENTUAN WAKTU BAKU PADA PRODUKSI SABUK JUMBO BAG MENGGUNAKAN METODE TIME STUDY PADA PT. SAMI SURYA PERKASA. Prosiding Seminar Nasional & Call for Paper Universitas Islam Batik "Penguatan Karakter Perguruan Tinggi Menuju Era Transformasi Teknologi. ISSN 978-979-1230-74-2

Shinya, Inazumi (2020) Artificial intelligence system for supporting soil classification. Artificial intelligence system for supporting soil classification, 8. p. 100188. ISSN 2590-1230

Susilo, Edy Joko and Purnomo, Hari and Okyajati, Nancy (2020) ANALISIS TINGKAT RISIKO CIDERA PEKERJA MENGGUNAKAN METODE RAPID ENTIRE BODY ASSESSMENT (REBA) PADA BAGIAN REACHING DI UNIT WEAVING II ( Studi Kasus di PT. Dan Liris Surakarta ). Edunomika, 4 (2). pp. 1052-1061.

T

Takagi, Hiroshi (2019) “Adapted mangrove on hybrid platform” – Coupling of ecological and engineering principles against coastal hazards. “Adapted mangrove on hybrid platform” – Coupling of ecological and engineering principles against coastal hazards, 4. p. 100067. ISSN 2590-1230

Tisnawati, Endah and Rani Natalia, Dita Ayu and Ratriningsih, Desrina (2019) STRATEGI PENGEMBANGAN EKO-WISATA BERBASIS MASYARAKAT DI KAMPUNG WISATA REJOWINANGUN. STRATEGI PENGEMBANGAN EKO-WISATA BERBASIS MASYARAKAT DI KAMPUNG WISATA REJOWINANGUN, XV (1). pp. 1-11.

Titisari, Kartika Hendra and Dewi, Riana Rachmawati and Rachmawatie, Srie Juli and Oktyajati, Nancy and Junaidi, Amir (2023) Kegiatan Pendampingan oleh Tim Pendamping Perguruan Tinggi Menuju SMK Pusat Keunggulan. Jurnal Abdi Masyarakat Indonesia (JAMSI), 3 (2). pp. 621-628. ISSN 2807-6567

U

Umiati, Sri (2019) PENGARUH PENAMBAHAN SUPERPLASTICIZER TERHADAPKUAT TEKAN BETON. In: PROSIDING 6 TH ACE CONFERENCE JURUSAN TEKNIK SIPIL UNIVERSITAS ANDALAS.

V

V, Vijayakumar and Joseph K, Suresh (2019) Adaptive Load Balancing Schema for efficient data dissemination in Vehicular Ad-Hoc Network VANET. Adaptive Load Balancing Schema for efficient data dissemination in Vehicular Ad-Hoc Network VANET, 61 (12). pp. 1157-1166. ISSN 1110-0168

V. Breschi, . and T. Bou, Hamdan and G. Merc`ere, . Tuning of subspace predictive controls. Tuning of subspace predictive controls. pp. 103-108.

van den Oever, Martien and Molenveld, Karin (2019) Creep deflection of Wood Polymer Composite profiles at demanding conditions. Creep deflection of Wood Polymer Composite profiles at demanding conditions. pp. 1-11.

W

W., Pawirodikromo (2020) Kajian Awal Kelas Situs untuk Perencanaan Ketahanan Gempa Berdasarkan Analisis Potensi Likuifaksi Akibat PGA Gempa Palu 2018 dan Peta Gempa Indonesia (Studi Kasus Perencanaan Gedung Kuliah IAIN Palu). In: PROSIDING Civil Engineering Environmental and Disaster Risk Management Symposium (CEE DRiMS 2020).

Wang, Weibiao and Hu, Kai (2020) A case study on asphalt core construction rate for the Zhaobishan embankment dam. A case study on asphalt core construction rate for the Zhaobishan embankment dam, 17. pp. 1-11.

Wen, Zitong (2022) Improvement Measures for Structure System Conversions Caused by Utilising SPMTs to Lift Trusses. In: Proceedings of the 8th International Conference on Civil Engineering.

Wiyoutomo, Panji and Kodir, Wahdirotul and Mahardhika, Adhitya Putra and Purwati, Sri (2023) PERANCANGAN PRODUK RAK DINDING DENGAN METODE QUALITY FUNCTION DEPLOYMENT(QFD). Journal of Research and Technology Studies, 2 (1). pp. 1-9. ISSN 2964-7371

Y

Yan-San, Huang (2019) Analyses of cracking failure in curved laminated lumber due to transverse stress under a curvature-decreasing moment. Analyses of cracking failure in curved laminated lumber due to transverse stress under a curvature-decreasing moment, 4. p. 100174. ISSN 2590-1230

Yang, Dongmei and Zhou, Yunhui and Huang, Wentao and Zhou, Xianwei (2020) 5G mobile communication convergence protocol architecture and key technologies in satellite internet of things system. 5G mobile communication convergence protocol architecture and key technologies in satellite internet of things system, 61 (12). pp. 465-476. ISSN 1110-0168

Yuwinti, Nearti and Budi, Fachrudin and Muhammad Andri, Zuliansyah KOMPARASI PENDAPATAN VARIETAS UNGGUL PADI DI LAHAN DEMONSTRATION-FARM (DEMFARM). KOMPARASI PENDAPATAN VARIETAS UNGGUL PADI DI LAHAN DEMONSTRATION-FARM (DEMFARM).

Z

Zhang, Juntao and Zhang, Guangli and Sun, Xinjian (2021) Analysis of compressive dynamic behaviors of plain concrete and lightweight aggregate concrete. Analysis of compressive dynamic behaviors of plain concrete and lightweight aggregate concrete. pp. 1-13.

Zhou, Shuguang and Zhang, Shuangzhong and Shen, Jiangjiang (2019) Effect of cattle manure ash’s particle size on compression strength of concrete. Effect of cattle manure ash’s particle size on compression strength of concrete. pp. 1-13.